Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Evo-Stik Lead And Gutter Silicone 310ml

Status : In stock

Delivery : Standard help

SKU : L021210
Inc VAT: £4.08
OR

Quick Overview

Low modulus, neutral-cure silicone sealant that forms a tough, elastic rubber. Gutter Silicone will bond to most building substrates such as lead, anodised and mill finished metals, painted steel, cast iron, brick, tile, slate, timber etc.

For assistance, please call:

020 8362 8100

Drag image to spin
360 Evo-Stik Lead And Gutter Silicone 310ml
Evo-Stik Trade Lead and Gutter Silicone is a low modulus, neutral-cure silicone sealant, based on silicone polymers, which on exposure to air, will react with moisture to form a tough, elastic rubber with the ability to accommodate high movement. Evo-Stik Trade Lead and Gutter Silicone bonds to most building substrates without a primer e.g. lead, anodised and mill finished metals, painted steel, cast iron, brick, tile, slate, timber and most plastics including PVCu

Key Features
  • Low modulus
  • Suitable for interior and exterior use
  • Highly Flexible
  • Lasts Up To 25 Years

Preparation
Joint surfaces must be clean, dry, sound and free from dust, oil, grease and other contaminants that may impair adhesion. Oil and grease should be removed from non-porous substrates using a suitable cleaner. In order to provide a firm base on which to extrude the sealant and also to ensure that suitable depth of sealant is maintained, moving joints should be backed with polyethylene foam backing strip. Do not apply sealant to frost contaminated surfaces.

Application
Unscrew the nozzle, and using a sharp knife, cut off the dome of the cartridge, taking care not to damage the thread. Screw the nozzle on to the cartridge. Cut off the tapered end of the nozzle at a 45° angle, to a width matching the gap to be sealed. Fit the cartridge into the cartridge gun by pressing the release plate and pulling out the plunger. Insert cartridge and repeatedly squeeze the trigger until the sealant appears. Place the nozzle at the start of the gap, and gently squeeze the trigger. Push forward slowly ensuring good surface contact by forcing sealant into the joint to be sealed. At the end of the run, release the trigger and press the plunger release plate of the gun. Smooth the sealant with a wet, round ended tool within 3-5 minutes (do not use a wetted finger), remove any excess with a cloth moistened with white spirit. The sealant skins over rapidly (approx 20 minutes) and is fully cured in approximately 24 hours depending on bead width, temperature and humidity.

Specific Data
Colour : Grey
Form : Thixotropic Paste
Specific Gravity : 1.01 at 23°C and 50% RH
Service Temperature : -60°C to +180°C
Application Temperature : +5°C to +40°C
Weight 0.44kg
Unit Of Sale Each
Size 310ml
Barcode 5000403102702
EDP code 483569
Brand Evo-Stik

You must be logged in to post a question.

No comments just yet - be the first!

Product Reviews

Number of reviews : 1
Average rating : 5 /5
K. Nigel
  the 06/12/2015
5/ 5
This really is a good product. My estate house has many flat roof areas and there are 'spot welds' necessary from time to time. Will use this product everytime.

There are no products matching the selection.

There are no products matching the selection.

Post your comment

Builder Depot