Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Evo-Stik Frame Silicone Sealant 310ml Clear

Status : In stock

Delivery : Standard help

SKU : L021209
Inc VAT: £3.96
OR

Quick Overview

Low modulus, neutral-cure sealant based on silicone polymers that forms a tough, elastic rubber. It is ideal for interior and exterior use and is made to accommodate high movement.

For assistance, please call:

020 8362 8100

Drag image to spin
360 Evo-Stik Frame Silicone Sealant 310ml Clear
Evo-Stik Trade Frame Silicone Sealant is a, low modulus, neutral-cure sealant based on silicone polymers which, on exposure to air, will react with moisture to form a tough, elastic rubber. Evo-Stik Trade Frame Silicone Sealant is a superior, long-life sealant specially formulated for its weatherproofing properties. It is suitable for interior and exterior use and has been developed to accommodate high movement.

Key Features
  • Permanently Flexible
  • Bonds to most building materials
  • Highly Waterproof
  • Low modulus
  • Lasts Up To 25 Years

Preparation
Joint surfaces must be clean, dry, sound and free from dust, oil, grease and other contaminants that may impair adhesion. Oil and grease should be removed from non-porous substrates using a suitable cleaner. In order to provide a firm base on which to extrude the sealant and also to ensure that suitable depth of sealant is maintained, moving joints should be backed with polyethylene foam backing strip.

Application
Unscrew the nozzle, and using a sharp knife, cut off the dome of the cartridge, taking care not to damage the thread. Screw the nozzle on to the cartridge. Cut off the tapered end of the nozzle at a 45° angle, to a width matching the gap to be sealed. Fit the cartridge into the cartridge gun by pressing the release plate and pulling out the plunger. Insert cartridge and repeatedly squeeze the trigger until the sealant appears. Place the nozzle at the start of the gap, and gently squeeze the trigger. Push forward slowly ensuring good surface contact by forcing sealant into the joint to be sealed. At the end of the run, release the trigger and press the plunger release plate of the gun. Smooth the sealant with a wet, round ended tool (do not use a wetted finger), remove any excess with a cloth moistened with white spirit. The sealant skins over rapidly (approx 30 minutes) and is fully cured in approximately 24 hours depending on bead width, temperature and humidity.

Specific Data
Colour : Clear
Form : Soft Paste
Specific Gravity : 1.01 at 23°C and 50% RH
Application Temperature : +5°C to +40°C.
Weight 0.33kg
Unit Of Sale Each
Colour Clear
Size 310ml
Barcode 5000403101071
EDP code 483705
Brand Evo-Stik

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.

There are no products matching the selection.

Post your comment

Builder Depot