Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Eporip 2Kg 2Part Adhesive Crack Repair & Cementitious Bonding

Status : In stock

Delivery : Standard help

SKU : L015937
Inc VAT: £34.20

For assistance, please call:

020 8362 8100

Eporip 2Kg 2Part Adhesive Crack Repair & Cementitious Bonding
Move your mouse over image or click to enlarge
360 Eporip 2Kg 2Part Adhesive Crack Repair & Cementitious Bonding
Mapei Epogrip is a two-component solvent-free epoxy resin, for repairing cracks in screeds. Suitable as a primer for tiling metal surfaces. Can also be used as a bonding aid for screeds.

Key Features
  • Multi-use
  • Can be used as a bonding bridge between old and new concrete
  • Pourable crack sealing

Surface Preparation
Substrates must be clean, solid and strong. All loose and crumbling parts, dust, cement, laitance and traces of form release oils and paint must be removed by careful sand-blasting or brushing. When applying the product to metal, remove any rust and grease residues beforehand, preferably by sand-blasting to white metal.

Recommended Systems
Pour component A into component B and mix with a trowel for small quantities or with a drill fitted with a low speed stirrer for large batches until the mix is perfectly smooth and even. Do not use partial amounts to avoid the risk of accidental ratio errors that could prevent curing. Eporip can be applied with a flat trowel or a brush on dry or slightly damp concrete. Let the product penetrate well into particularly uneven or porous areas to ensure perfect adhesion to all areas. The subsequent layer of fresh concrete must be placed within the open times according to temperature.

Depends on irregularities within the substrate and the method used in application. Construction joints with a rough substrate 0.5-0.7 kg/m². Construction joints with a very uneven substrate 1.0-2.0 kg/m². Sealing cracks 1.35 kg/l per litre of cavity.

Technical Characteristics
Eporip is a solvent free epoxy adhesive consisting of two pre-measured components (component A - resin, component B - hardener), to be mixed before use. Eporip has the consistency of a slightly thixotropic paste that can be applied by brush to horizontal and vertical surfaces. Eporip polymerises without shrinkage, and after curing, is waterproof, has high mechanical strength and can bond concrete and steel. When Eporip is used to seal cracks wider than 0.5mm simply placing is sufficient. For this it is recommended to spread sand over the Eporip surface to favour bonding of subsequent products. Cracks narrower than 0.5mm have to be widened and dusted well before repairing with Eporip.
Weight 2Kg
Unit Of Sale Each
Barcode 8022452001031
EDP code 152102 153102
Brand Mapei

You must be logged in to post a question.

No comments just yet - be the first!

Product Reviews

Number of reviews : 1
Average rating : 5 /5
C. Paul
  the 31/08/2015
5/ 5
Its a 2 part epoxy resin. i used it for filling in cracks in the concrete of my kitchen floor before re-tiling. It was easy to apply as it was a pouring consistency. Only time will tell how well it has worked though.

There are no products matching the selection.

There are no products matching the selection.

Post your comment

Builder Depot