- Durable for up to 15 years*
- 30 minutes water resistant Coverage up to 16m2 per litre
- Suitable for roller, brush and spray application.
To get the best results with Dulux trade Weathershield smooth masonry make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Brush, roller or spray.
Stir thoroughly before use. Seal new or bare surfaces with a thinned coat Weathershield smooth masonry paint (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 full coats of Weathershield smooth masonry paint, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient. *In normal conditions two coats of Weathershield smooth masonry paint, properly applied to the substrate in accordance with the instructions, will perform satisfactorily for up to 15 years.
After use, remove as much paint as possible from brushes before cleaning with clean water. Do not use or store in extremes of temperature and protect from frost.
EU limit value for this product (cat A/c) : 75g/l (2007) / 40g/l (2010)
This product contains max 30g/l VOC
|Unit Of Sale||Each|
You must be logged in to post a question.
No comments just yet - be the first!