Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Cromar ProGRP Roofing 25 Topcoat 10Kg (Avg 17M2 Coverage)

Status : In stock

Delivery : Big and Bulky help

SKU : H003731
Inc VAT: £58.32

Quick Overview

The Cromar ProGRP glass reinforced flat roof system is an integrated all in one system. Cromar ProGRP is cold applied and easy to form creating a durable, virtually maintenance free impact resistant weatherproof roof.

For assistance, please call:

020 8362 8100

Drag image to spin
360 Cromar ProGRP Roofing 25 Topcoat 10Kg (Avg 17M2 Coverage)
Cromar ProGRP is a Glass Reinforced Polyester flat roof system designed and engineered for flat roof applications. ProGRP is a fully integrated all in one system where the components work together on virtually all types of flat roofs and vertical surfaces in any domestic or commercial application to provide the perfect all weather protection.

ProGRP Topcoat is available in 10Kg and 20Kg cans allowing for flexibility and reduced wastage, all cans must be fully shaken or stirred before use. if separate cans are being used, mix together to avoid any colour variations between batches.

Key Features
  • Cold applied - No heat needed
  • Easy to form
  • Durable - Resists heavy foot traffic
  • Virtually maintenance free
  • Impact resistant
  • Fire retardant
  • Storm proof
  • Frost proof

Before applying ProGRP Topcoat it will be necessary to lightly sand the whole of the roof surface, corners and details. Smooth, unblemished surfaces will produce a high quality finish when top coated. After the roof has been sanded an Acetone wipe will aid adhesion of the final topcoat. using a sanding pad or sandpaper lightly sand the corners taking care not to create any holes.

Top coating
Calculate the amount of topcoat required, measure out into a bucket and add catalyst to each batch of topcoat as you need it. Stir well for at least 1 minute. Apply to the roof surface starting at the furthest point from the exit point on the roof and using the relevant sized soft application roller. The topcoat applied should allow the fibre pattern of the laminate to still be visible after application.

Non-Slip Finish
If a non-slip finish is required, a grit or slate chippings can be sprinkled on to the topcoat, this should be added by hand or a dispenser as the roof is top coated. For a neat finish use masking tape or battens to define the edges of the aggregated areas.
Size 10Kg
Unit Of Sale Each
Brand ProGRP
Barcode 5036684003773
EDP code G25/TOP10FR

Product Attachments

View FileCromar ProGRP    Size: (612.17 KB) Installation Guide

You must be logged in to post a question.

No comments just yet - be the first!

Post your comment

Builder Depot