Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Cromar ProGRP Roofing 25 Resin 20Kg (Avg 16M2 Coverage)

Status : In stock

Delivery : Big and Bulky help

SKU : H003730
Inc VAT: £71.94

Quick Overview

The Cromar ProGRP glass reinforced flat roof system is an integrated all in one system. Cromar ProGRP is cold applied and easy to form creating a durable, virtually maintenance free impact resistant weatherproof roof.

For assistance, please call:

020 8362 8100

Drag image to spin
360 Cromar ProGRP Roofing 25 Resin 20Kg (Avg 16M2 Coverage)
Cromar ProGRP is a Glass Reinforced Polyester flat roof system designed and engineered for flat roof applications. ProGRP is a fully integrated all in one system where the components work together on virtually all types of flat roofs and vertical surfaces in any domestic or commercial application to provide the perfect all weather protection.

The ProGRG fibreglass resin is a pre-accelerated, thixotropic, orthophthalic resin formulated for extremely low styrene emission. The correct ratio of resin to glass fibre chop strand mat (450gsm) is 1.5 litres of resin per m² of mat. 600gsm mat will use approx. 33% more, the thicker the mat, the more resin is needed.

When a laminate is built up in stages with intermediate curing, each operation should be finished off with a normal resin / glass fibre ratio. Any surface area of a cured laminate having an excess of resin, must be abraded before the laminating is continued. With a normal resin / glass fibre ratio on the laminate surface, the interval between each operation must not exceed 48 hours without abrasion.

Key Features
  • Very low styrene emission resulting in lower styrene levels in working atmospheres
  • Improved water resistance
  • Low viscosity for rapid and efficient fibre wet out in both hand and spray lay-up
  • Long pot life combined with rapid cure
  • Lower exotherm allowing thick sections to ne fabricated with reduced risk of distortion
  • Approved by Lloyds Register of shipping for use in the construction of boats moulded under their survey

Prolonged storage or unfavourable storage conditions may cause slight separation, agitation of resin is recommended before use.
Size 20Kg
Unit Of Sale Each
Brand ProGRP
Barcode 5036684003704
EDP code G25/25RESIN20

Product Attachments

View FileCromar ProGRP    Size: (612.17 KB) Installation Guide

You must be logged in to post a question.

No comments just yet - be the first!

Post your comment

Builder Depot