Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Bostik Intucrylic Intumescent Acrylic Sealant 310ml

Status : In stock

Delivery : Standard help

SKU : L021219
Inc VAT: £2.70

Quick Overview

High quality water-borne acrylic intumescent building sealant. This sealant will form a tough, track-free sealant with adhesion to a vast variety of building surfaces. In the event of a fire, it will swell to form an insulating char that is fire resistant.

For assistance, please call:

020 8362 8100

Drag image to spin
360 Bostik Intucrylic Intumescent Acrylic Sealant 310ml
Bostik Intucrylic is a high quality water-borne acrylic intumescent building sealant. It cures to form a tough, tack-free seal with excellent adhesion to a wide variety of building surfaces. In the event of a fire, Bostik Intucrylic will swell (intumesce) to form an insulating char, which is fire resistant and will resist the passage of smoke and flame. Bostik Intucrylic is used for sealing expansion, contraction and construction joints where compartmentation and movement are factors; as a bedding/sealing compound for locating fire resistant board systems; to seal gaps which occur between fire-rated building components and the surrounding structures i.e. window and door frames; and as a service penetration seal system for both cables and pipes.

Key Features
  • Water Borne Acrylic
  • Swells To Form Barrier
  • Will Not Slump
  • Minimal Shrinkage
  • Rapid Curing
  • Can Be Over painted

Excellent to most firm, clean and dry surfaces

All surfaces must be sound, clean, dry and free from oil, grease, dust and other loose matter. Oil and grease should be removed from non-porous substrates using a suitable cleaner. In order to provide a firm base on which to extrude the sealant, and also to ensure that adequate depth of sealant is maintained, movement joints should be backed with a suitable foam backing strip such as polyethylene. Cut off the dome at the top of the cartridge, cut the nozzle to the required diameter and then screw it onto the cartridge. Insert the cartridge into a skeleton gun and squeeze the trigger until the sealant appears. Force the sealant into the joint ensuring that it makes full contact with the sides. The sealant surface can be tooled to a smooth finish using a tooling stick or trowel dipped in diluted detergent within 3-5 minutes of application. Do not use a wetted finger. Clean application equipment and remove excess uncured sealant with water and cured sealant by abrasion.

Specific Data
Colour : White
Form : Gunnable Paste
Specific Gravity : 1.63 g/cm³
Drying Time - Touch : Forms a skin within 15 minutes
Drying Time - Through : 96 Hours, dependent
Service Temperature : -30°C to +95°C
Application Temperature : +5°C to +40°C
Size 310ml
Unit Of Sale Each
Weight 0.51kg
Brand Bostik
Barcode 5000403100913
EDP code 241831

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.

Base on your selection, you may be interested in the following items