Show Prices Including VAT

We're here to help 020 8362 8100

  • Take a tuor through our store in New Southgate
  • Branch Finder
  • Find out about our delivery service
  • Dispaly Prices excl. VAT

Adesilex 20Kg P4 Adhesive Grey For Large Profile Tiles

Status : In stock

Delivery : Free delivery help

  • Buy 5 for £22.86 each and save 8%
  • Buy 10 for £21.60 each and save 13%
SKU : L016194
Inc VAT: £24.66

Quick Overview

Mapei Adesilex P4 Tile Adhesive is a pourable adhesive for bonding all types of medium and large ceramic and stone floor tiles. Mapei Adesilex can also be used as floor levelling compound in external and internal areas.

For assistance, please call:

020 8362 8100

Drag image to spin
360 Adesilex 20Kg P4 Adhesive Grey For Large Profile Tiles
Adsilex P4 Tile Adhesive is a full contact, rapid setting, pourable adhesive for the interior and exterior bonding of all types of medium and large sized ceramic and stone floor tiles in environments subject to heavy traffic. Can also be used as an internal and external levelling compound.

Key Features
  • Ideal for large formatted tiles
  • Can also be used as a internal / external levelling compound
  • Pourable full bed adhesive

Recommended Systems
Mix Adesilex P4 in a clean container with 3.2 - 3.6 litres of clean water for every 20kg powder until a smooth lump-free paste is obtained. Let the mix stand for 3 minutes then stir again, when the mix is ready for use. Mixed this way Adesilex P4 will have a pot life of approx. 60 minutes at +23anddeg;C and 50and#37; R.H. If both adhesive and tiles are very thick, or the tiles are particularly heavy, 20and#37; of suitably graded clean clean sand may be added to prevent shrinkage or settling. Apply Adesilex P4 to the substrate with a suitable trowel depending on the size of the tiles and the substrate. Do not wet tiles before fixing, only when very dusty it is recommended they are dipped in clean water. Dry off before fixing. Lay the tiles into the bed of Adesilex P4 with light hand movement to ensure 100% coverage. Open time in normal temperature and humidity is approximately 15 minutes. This may be shortened significantly by unfavourable weather conditions so constant checks should be made to ensure the adhesive is still fresh. Dampening the substrate prior to tiling can lengthen open time, however if a skin has formed, re-trowel the adhesive. Do not wet the adhesive once a skin has formed. Tile adjustment should be carried out within 30 minutes of installation.
Unit Of Sale Each
Weight 20Kg
Brand Mapei
Barcode 8022452028274
EDP code 218220

Product Attachments

View FileAdesilex P4 Adhesive    Size: (308.16 KB) Technical Data Sheet
View FileAdesilex P4 Adhesive    Size: (49.27 KB) Safety Data Sheet

You must be logged in to post a question.

No comments just yet - be the first!

There are no products matching the selection.

There are no products matching the selection.

Post your comment

Builder Depot